This is still probably somewhat wrong In the board outlines and mounting hole placement but the pads in both breadboard and pcb should now be correct and the holes in pcb are sized to accept. OK fixed up the hole size problem (I think you were wise to accept the offer to fix it up, the hole size fix is relatively easy for me with a text editor and knowing what I needed to do, not so easy for someone new to parts making). There are a couple of tutorials on making parts using Inkscape (an open source svg editor) available here: To do that I need the dimensions of the changes you need made (typically I use vernier calipers to measure the dimensions on the board and get close to the position and size of mounting holes). If this is all you want to do it may be easiest for me to make the changes for you. 9 inches wide which is pretty standard for these types of thing is yours more or less than this spacing)? Parts modification is fairly complex although useful to learn if you want to use Fritzing. Does the board you have use something like 2mm headers? Or is the issue spacing between the sets of pins (the github part is. That matches the pin spacing in the part from github. From the photo the pins appear to be standard. However I’m unclear what the pin spacing issue is. Any Fritzing part in fzpz format contains the necessary files to modify it (an fpz file and 4 svg files all zipped typically).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |